Lowell 10KLVC-RM Attenuator-10K ohm Potentiometer Rackmount

Write a Review

Ask a Question

10KLVC

10KLVC-RM: MONO Potentiometer

A 10k ohm linear taper control for single-point remote level adjustment of voltage controlled amplifiers (VCA) interfaces directly with three-wire, 0 to 10 volt control inputs typical on VCAs. The 10k ohm potentiometer allows the amplifier’s control voltage to be set or adjusted from a single remote location.

SPECIFICATIONS

• Power Rating:  0.5W

• Attenuation:  Continuous

• Use With:  VCA control or audio circuit

• Activation:  Rotary dial

• Termination:  Phoenix-style

• Wire Capacity:  14-gauge

• Adhesive label with dial scale and label window

• Install in rackmount panel (order separately)

COMPLIANCE & CERTIFICATION

• Made in the U.S.A. with global components

A&E SPECIFICATIONS

The potentiometer control shall be Lowell Model No. 10KLVC-RM, which shall be a linear taper style potentiometer with 10,000 (10k) ohm resistance and 1/2W power rating. It shall be compatible with three-wire 0-10 volt control inputs on voltage control amplifiers (by others) for level adjustment from a single remote location. Attenuation shall be continuously variable with stops at minimum and maximum levels. The control shall include a knob, adhesive label (2 in. x 2.5 in.) with dial scale, and plastic window for a label.

OPTIONS (order separately)

• LVC8P-ID2:  Rackmount panel for attenuator installation (holds up to eight)

OTHER MODELS:

10KLVC-DA Decorator/Almond

10KLVC-DSW Decorator/Stainless & White

10KLVC-DW Decorator/White

10KLVC-DB Decorator/Black

10KLVC-RM 10k ohm