Previous

Atlas Sound IP-SDMFLED - 8" In-Wall/In-Ceiling PoE+ IP Loudspeaker System with Microphone, Flasher and LED Display

Atlas Sound IP-SDMFLED - 8" In-Wall/In-Ceiling PoE+ IP Loudspeaker System with Microphone, Flasher and LED Display
Click To Enlarge
MSRP: $1,481.99
Sale Price: $1,187.99
You Save $294.00 (20%)
USD Priced Per Each
Order In Multiples: 1
Qty:

$49 Minimum Order.



Save up to 60%. Contact us for Special Pricing combining product, quantity, shipping and terms. Email [email protected]

• Brand: Atlas Sound

• MPN: IP-SDMFLED

• Ship Weight: 10lbs

• GTIN: 612079664399

• Condition: New

• Availability: In Stock

• Seller: A-I Consolidated

• Category: Electronics > Audio > Audio Components

Atlas Sound IP-SDMFLED - 8" In-Wall/In-Ceiling PoE+ IP Loudspeaker System with Microphone, Flasher and LED Display.




AtlasIED IPX Series IP-SDMFLED indoor wall mount IP speaker with LED display and flasher leverage the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.

AtlasIED IP-SDMFLED registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, & scheduled announcements, while leveraging the WAN/LAN Network Architecture. 

When used within a Cisco Environment, these same IP speakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

Mounting hardware: (sold separately)

  • Wall – Flush (In-Wall): IP-FEST-SD
  • Wall – Surface (On-Wall): IP-SEST-SD
  • Wall – Slanted (On-Wall): IP-SEA-SD
FEATURES
  • Dynamic or Static IP Address
  • IEEE802.3 10/100Base-T Ethernet
  • IEEE 802.1q Tagging
  • IEEE 802.11AT Compliant
  • VoIP Standard Audio: G.711 u-law/a-law (64 kbit/s) or G.722 Wideband Audio (64 kbit/s)

  • Auto Provisioning: DHCP Option 66, 150, or TFTP Server or DHCP Option 72 for HTTP Server
  • Auto Registration: SLP for InformaCast or DHCP Option 72 for Revolution or GCK

  • Static Configuration: HTTP GUI for Static Configuration or Cisco SRST

Audio Features

  • Integrated Amplifier 15-Watt Total Power: Primary Speaker Output 8 ohm
  • Aux Audio Line-In Unbalanced (2.8Vpp 10K)
  • Aux Audio Line-Out Unbalanced (2.8Vpp 10K)
  • Additional Features
  • 2 General Purpose Inputs
  • PoE+Enabled

  • 1 General Purpose Output (2A @ 30 VDC)
  • Phone/Night Loud Ringer
  • External Power Supply Option

SPECIFICATIONS
SPEAKER TYPE Coaxial
SPEAKER SIZE 8" LF, 1" HF
FREQUENCY RESPONSE 86Hz - 15.5kHz
DISPERSION 105? (2kHz Octave Band, -6dB Points)
SENSITIVITY 98dB SPL Average
POWER RATING 12-Watts Max (802.3AF) / 25-Watts Max (802.3AT)
THD <0.2%
GRILLE Powder Coated Steel
CONNECTOR TYPE RJ-45
HEIGHT 14.37" (365mm)
DEPTH 3.42" (87mm)
WIDTH 12.87" (327mm)
SAFETY LISTED 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC
SHIPPING WEIGHT 6.37 lbs (2.89kgs)

Datasheet, Installation Sheet, and Other Information Available Upon Request.