Lowell LBS8 - Tile Bridge for 8 in Spkr Assy, Galvanized 24-gauge Steel.

Write a Review

Ask a Question

LBS8

• For use with an 8” speaker assembly
• Fast Twist ‘n Lock backbox installation

• Galvanized 24-gauge steel
• Formed construction—lightweight, rigid support
• 23.75”L x 15.5”W
• 8.5” square opening in center
• Multiple formed ribs for strength
• Multiple attachment points for versatility
• Wire holes at each corner allow for seismic anchoring where required by code
• Mounts an 8” speaker assembly with a screwmount grille (with or without backbox) or a torsion grille (with backbox)
• Unique Twist ‘n Lock feature provides hardware-free mounting to speed installation of round enclosures
• Installation can also be accomplished in a standard manner with mounting bolts (not included).
• Made in the U.S.A.

Installation
• Twist ‘n Lock: Place the specified round backbox
(IX810, 8XD4 Series, or XCP8 Series) on the tilebridge, aligning cutouts on the backbox lip to tabs on the bridge. Push down and twist until the backbox locks in place.
• Standard Installation: Backboxes can also be mounted to the LBSB tile-bridge with four 8-32 bolts (not included).

Compatible System Components (order separately)

* The LBS8 tile-bridge does not include mounting bolts. The installer will need to supply four (4) 8-32 bolts to mount the tilebridge to a backbox that doesn’t feature Twist ‘n Lock cutouts.
** When installing the SG-8 or IC105A grille in a tile ceiling with a backbox (P68X or P68X-6), use SS24 rails instead of the
LBS8 tile-bridge.
*** When installing the SG-8 or IC105A grille in a tile ceiling without a backbox, you can use the LBS8 tile-bridge if you bend the
two center tabs up 90 degrees (see technical drawing).